< PDM < 165 mm < 6/7 5.0
Close button
  • 1.
      • 5/6 5.0 HR
      • 7/8 2.2 HR
      • 7/8 3.8
      • 7/8 3.8 HR
      • 7/8 6.0
      • 7/8 6.0 HR
      • 7/8 4.8 HR
      • 7/8 3.0 HR
      • 6/7 5.0
      • 4/5 7.0 HR
      • 6/7 5.0 HR
      • Short spindle (HB21)
      • 7/8 4.8 HR
      • 7/8 3.0 HR
      • 7/8 6.0
      • 7/8 6.0 HR
      • 6/7 5.0 HR
      • 6/7 5.0
      • 4/5 7.0 HR
      • 7/8 4.0
      • 7/8 4.0 HR
      • 6/7 6.0
      • 6/7 5.0
      • 5/6 5.0 HR
  • 2.
      • 5/6 5.0 HR
      • 7/8 2.2 HR
      • 7/8 3.8
      • 7/8 3.8 HR
      • 7/8 6.0
      • 7/8 6.0 HR
      • 7/8 4.8 HR
      • 7/8 3.0 HR
      • 6/7 5.0
      • 4/5 7.0 HR
      • 6/7 5.0 HR
      • Short spindle (HB21)
      • 7/8 4.8 HR
      • 7/8 3.0 HR
      • 7/8 6.0
      • 7/8 6.0 HR
      • 6/7 5.0 HR
      • 6/7 5.0
      • 4/5 7.0 HR
      • 7/8 4.0
      • 7/8 4.0 HR
      • 6/7 6.0
      • 6/7 5.0
      • 5/6 5.0 HR
  • 3.
      • 5/6 5.0 HR
      • 7/8 2.2 HR
      • 7/8 3.8
      • 7/8 3.8 HR
      • 7/8 6.0
      • 7/8 6.0 HR
      • 7/8 4.8 HR
      • 7/8 3.0 HR
      • 6/7 5.0
      • 4/5 7.0 HR
      • 6/7 5.0 HR
      • Short spindle (HB21)
      • 7/8 4.8 HR
      • 7/8 3.0 HR
      • 7/8 6.0
      • 7/8 6.0 HR
      • 6/7 5.0 HR
      • 6/7 5.0
      • 4/5 7.0 HR
      • 7/8 4.0
      • 7/8 4.0 HR
      • 6/7 6.0
      • 6/7 5.0
      • 5/6 5.0 HR
Compare

PDM 6/7 5.0

add to comparison

specifications

Metric
Imperial
Pump rate
19-38 l/s
300-600 gallons/minute
RPM
87-174 rpm
87-174 rpm
Rotational speed ratio
0,077 r/l
0,29 r/gallon
Recommended maximum differential pressure
6 033 kPa
875 psi
Torque Ratio
1,636 Nm/kPa
8,32 ft Ibs/ psi
Torque at the maximum differential pressure
9 870 Nm
7 280 ft Ib
Brake torque
14 808 Nm
10 920 ft Ib
Distance from the drill bit to the bent sub
-
-
Connecting threads
-
-
Maximum load on the bit
39 000 daN
87 000 lbs
Maximum pulling force at the back stopper
39 000 daN
87 000 lbs
Maximum pulling force
266 000 daN
597 000 lbs
Weight of the motor
1 135 kg
2 500 lbs
Length of the motor
8,66 m
28,4 lbs
Adjustable bent housing torque(S22)
47 450 Nm
35 000 ft lbs
Hole diameter
216 -250 mm
8 1/2" - 9 7/8"
Upper connecting thread
NC 50 (4 1/2" IF) (Z-133)
NC 50 (4 1/2" IF) (Z-133)
Bit connecting thread
4 1/2" Reg (Z-117)
4 1/2" Reg (Z-117)
Adjustable bent housing torque (S14)
-
-
Stabilizer torque
16 300 Nm
12 000 ft lb
Stabilizer size
212,7 mm
8 3/8"
Distance from the bit to the adjustable bent sub
1,63 m
5,34 ft
Distance from the bit to the fixed bent sub
1,32 m
4,32 ft
pdf logo specifications
[PDF, 163 KB] Print