< PDM < 165 mm < 7/8 6.0
Close button
  • 1.
      • 5/6 5.0 HR
      • 7/8 2.2 HR
      • 7/8 3.8
      • 7/8 3.8 HR
      • 7/8 6.0
      • 7/8 6.0 HR
      • 7/8 4.8 HR
      • 7/8 3.0 HR
      • 6/7 5.0
      • 4/5 7.0 HR
      • 6/7 5.0 HR
      • Short spindle (HB21)
      • 7/8 4.8 HR
      • 7/8 3.0 HR
      • 7/8 6.0
      • 7/8 6.0 HR
      • 6/7 5.0 HR
      • 6/7 5.0
      • 4/5 7.0 HR
      • 7/8 4.0
      • 7/8 4.0 HR
      • 6/7 6.0
      • 6/7 5.0
      • 5/6 5.0 HR
  • 2.
      • 5/6 5.0 HR
      • 7/8 2.2 HR
      • 7/8 3.8
      • 7/8 3.8 HR
      • 7/8 6.0
      • 7/8 6.0 HR
      • 7/8 4.8 HR
      • 7/8 3.0 HR
      • 6/7 5.0
      • 4/5 7.0 HR
      • 6/7 5.0 HR
      • Short spindle (HB21)
      • 7/8 4.8 HR
      • 7/8 3.0 HR
      • 7/8 6.0
      • 7/8 6.0 HR
      • 6/7 5.0 HR
      • 6/7 5.0
      • 4/5 7.0 HR
      • 7/8 4.0
      • 7/8 4.0 HR
      • 6/7 6.0
      • 6/7 5.0
      • 5/6 5.0 HR
  • 3.
      • 5/6 5.0 HR
      • 7/8 2.2 HR
      • 7/8 3.8
      • 7/8 3.8 HR
      • 7/8 6.0
      • 7/8 6.0 HR
      • 7/8 4.8 HR
      • 7/8 3.0 HR
      • 6/7 5.0
      • 4/5 7.0 HR
      • 6/7 5.0 HR
      • Short spindle (HB21)
      • 7/8 4.8 HR
      • 7/8 3.0 HR
      • 7/8 6.0
      • 7/8 6.0 HR
      • 6/7 5.0 HR
      • 6/7 5.0
      • 4/5 7.0 HR
      • 7/8 4.0
      • 7/8 4.0 HR
      • 6/7 6.0
      • 6/7 5.0
      • 5/6 5.0 HR
Compare

PDM 7/8 6.0

add to comparison

specifications

Metric
Imperial
Pump rate
19-38 lps
300-600 gallons/minute
RPM
78-157 rpm
78-157 rpm
Rotational speed ratio
0,069 r/l
0,26 r/gallon
Recommended maximum differential pressure
7 239 kPa
1 050 psi
Torque Ratio
1,784 Nm/kPa
9,07 ft lb/ psi
Torque at the maximum differential pressure
12 915 Nm
9 525 ft lb
Brake torque
19 375 Nm
14 288 ft lb
Distance from the drill bit to the bent sub
-
-
Connecting threads
-
-
Maximum load on the bit
30 450 daN
68 500 lb
Maximum pulling force at the back stopper
24 500 daN
55 200 lb
Maximum pulling force
265 400 daN
597 000 lb
Weight of the motor
970 kg
2 100 lb
Length of the motor
8,56 m
28,08 ft
Adjustable bent housing torque(S22)
40 700 Nm
30 000 ft lb
Hole diameter
200-250 mm
7 7/8" - 9 7/8"
Upper connecting thread
NC 50 (4 1/2" IF) (Z-133)
NC 50 (4 1/2" IF) (Z-133)
Bit connecting thread
4 1/2" Reg (Z-117)
4 1/2" Reg (Z-117)
Adjustable bent housing torque (S14)
-
-
Stabilizer torque
16 300 Nm
12 000 ft lb
Stabilizer size
212,7 mm
8 3/8"
Distance from the bit to the adjustable bent sub
1,72 m
5,64 ft
Distance from the bit to the fixed bent sub
0,8 m
2,62 ft
pdf logo specifications
[PDF, 152 KB] Print