< PDM < 241 mm < 5/6 5.0 HR
Close button
  • 1.
      • 5/6 5.0 HR
      • 7/8 2.2 HR
      • 7/8 3.8
      • 7/8 3.8 HR
      • 7/8 6.0
      • 7/8 6.0 HR
      • 7/8 4.8 HR
      • 7/8 3.0 HR
      • 6/7 5.0
      • 4/5 7.0 HR
      • 6/7 5.0 HR
      • Short spindle (HB21)
      • 7/8 4.8 HR
      • 7/8 3.0 HR
      • 7/8 6.0
      • 7/8 6.0 HR
      • 6/7 5.0 HR
      • 6/7 5.0
      • 4/5 7.0 HR
      • 7/8 4.0
      • 7/8 4.0 HR
      • 6/7 6.0
      • 6/7 5.0
      • 5/6 5.0 HR
  • 2.
      • 5/6 5.0 HR
      • 7/8 2.2 HR
      • 7/8 3.8
      • 7/8 3.8 HR
      • 7/8 6.0
      • 7/8 6.0 HR
      • 7/8 4.8 HR
      • 7/8 3.0 HR
      • 6/7 5.0
      • 4/5 7.0 HR
      • 6/7 5.0 HR
      • Short spindle (HB21)
      • 7/8 4.8 HR
      • 7/8 3.0 HR
      • 7/8 6.0
      • 7/8 6.0 HR
      • 6/7 5.0 HR
      • 6/7 5.0
      • 4/5 7.0 HR
      • 7/8 4.0
      • 7/8 4.0 HR
      • 6/7 6.0
      • 6/7 5.0
      • 5/6 5.0 HR
  • 3.
      • 5/6 5.0 HR
      • 7/8 2.2 HR
      • 7/8 3.8
      • 7/8 3.8 HR
      • 7/8 6.0
      • 7/8 6.0 HR
      • 7/8 4.8 HR
      • 7/8 3.0 HR
      • 6/7 5.0
      • 4/5 7.0 HR
      • 6/7 5.0 HR
      • Short spindle (HB21)
      • 7/8 4.8 HR
      • 7/8 3.0 HR
      • 7/8 6.0
      • 7/8 6.0 HR
      • 6/7 5.0 HR
      • 6/7 5.0
      • 4/5 7.0 HR
      • 7/8 4.0
      • 7/8 4.0 HR
      • 6/7 6.0
      • 6/7 5.0
      • 5/6 5.0 HR
Compare

PDM 5/6 5.0 HR

add to comparison

specifications

Metric
Imperial
Pump rate
44-82 l/s
700-1300 gallons/minute
RPM
96-180 rpm
96-180 rpm
Rotational speed ratio
0,036 r/l
0,14 r/gallon
Recommended maximum differential pressure
7 760 kPa
1130 psi
Torque Ratio
4,225 Nm/kPa
21.49 ft lb/psi
Torque at the maximum differential pressure
32 770 Nm
24 170 ft Ib
Brake torque
49 160 Nm
36 260 ft Ibs
Distance from the drill bit to the bent sub
-
-
Connecting threads
-
-
Maximum load on the bit
84 500 daN
190 000 lbs
Maximum pulling force at the back stopper
60 780 daN
136 640 lbs
Maximum pulling force
590 660 daN
1 328 000 lbs
Weight of the motor
2 960 kg
6 530 lbs
Length of the motor
11,42 m
37, 48 ft
Adjustable bent housing torque(S22)
81 300 Nm
60 000 ft lbs
Hole diameter
311-445 mm
12 1/4" - 17 1/2"
Upper connecting thread
-
-
Bit connecting thread
Z-152
6 5/8 Reg
Adjustable bent housing torque (S14)
81 350 Nm left
60 000 ft lbs (left)
Stabilizer torque
54 200 Nm
40 000 ft lbs
Stabilizer size
-
-
Distance from the bit to the adjustable bent sub
2,84 m
9,33 ft
Distance from the bit to the fixed bent sub
2,67 m
8,77 ft
pdf logo specifications
[PDF, 185 KB] Print